Corporate Banner
Satellite Banner
Automation & Microfluidics
Scientific Community
 
Become a Member | Sign in
Home>News>This Article
  News
Return

Antenna-on-a-Chip Rips the Light Fantastic

Published: Wednesday, November 21, 2012
Last Updated: Wednesday, November 21, 2012
Bookmark and Share
A Rice University lab produces a micron-scale spatial light modulator like those used in sensing and imaging devices, but with the potential to run orders of magnitude faster.

A device that looks like a tiny washboard may clean the clocks of current commercial products used to manipulate infrared light.

New research by the Rice University lab of Qianfan Xu has produced a micron-scale spatial light modulator (SLM) like those used in sensing and imaging devices, but with the potential to run orders of magnitude faster. Unlike other devices in two-dimensional semiconducting chips, the Rice chips work in three-dimensional “free space.”

Xu and his Rice colleagues detailed their antenna-on-a-chip for light modulation this week in Nature’s open-access, online journal Scientific Reports.

The manipulation of light has become central to the information economy. Think about light-reflecting compact discs and their video variants and all the ways lasers are used, from sensing to security to surgery. Light carries data through optical fibers for telecommunications and signals on the molecular scale as photonics techniques improve. Light-emitting diodes power television displays (for viewers clutching infrared remotes) and are beginning to replace the inefficient light bulbs in homes.

But in the computer space, light has been bound and gagged by two-dimensional circuitry, tied to waveguides that move it from here to there, Xu said. He and his colleagues point out in the new paper that 2-D systems fail to take advantage of “the massive multiplexing capability of optics” made possible by the fact that “multiple light beams can propagate in the same space without affecting each other.”

The researchers see great potential for free-space SLMs in imaging, display, holographic, measurement and remote sensing applications.

Simply put, the Rice team’s microscopic SLM chips are nanoscale ribs of crystalline silicon that form a cavity sitting between positively and negatively doped silicon slabs connected to metallic electrodes. The positions of the ribs are subject to nanometer-scale “perturbations” and tune the resonating cavity to couple with incident light outside. That coupling pulls incident light into the cavity. Only infrared light passes through silicon, but once captured by the SLM, it can be manipulated as it passes through the chip to the other side. The electric field between the electrodes turns the transmission on and off at very high speeds.

Individual SLMs are analogous to pixels, and Xu, an assistant professor of electrical and computer engineering, sees the possibility of manufacturing chips that contain millions of them.

In conventional integrated photonics, “You have an array of pixels and you can change the transmission of each pixel at a very high speed,” he said. “When you put that in the path of an optical beam, you can change either the intensity or the phase of the light that comes out the other side.

“LED screens are spatial light modulators; so are micromirror arrays in projectors, in which the mirrors rotate,” he said. “Each pixel changes the intensity of light, and you see an image. So an SLM is one of the basic elements of optical systems, but their switching speed is limited; some can get down to microseconds, which is okay for displays and projection.

“But if you really want to do information processing, if you want to put data on each pixel, then that speed is not good enough.” Xu said the Rice team’s device “can potentially modulate a signal at more than 10 gigabits per second.

“What we show here is very different from what people have been doing,” he said. “With this device, we can make very large arrays with high yield. Our device is based on silicon and can be fabricated in a commercial CMOS factory, and it can run at very high speed. We think this can basically scale up the capability of optical information processing systems by an order of several magnitudes.”

As an example, he suggested the device could give the single-pixel camera in development at Rice – which at the beginning took eight hours to process an image – the ability to handle real-time video.

“Or you could have an array of a million pixels, and essentially have a million channels of data throughput in your system, with all this signal processing in parallel,” he said. “If each pixel only runs at kilohertz speeds, you don’t get much of an advantage compared with microelectronic systems. But if each pixel is working at the gigahertz level, it’s a different story.”

Though Xu’s antennas would not be suitable for general computing, he said, they could be capable of optical processing tasks that are comparable in power to supercomputers. “Optical information processing is not very hot,” he admitted. “It’s not fast-developing right now like plasmonics, nanophotonics, those areas. But I hope our device can put some excitement back into that field.”


Further Information

Join For Free

Access to this exclusive content is for Technology Networks Premium members only.

Join Technology Networks Premium for free access to:

  • Exclusive articles
  • Presentations from international conferences
  • Over 3,900+ scientific posters on ePosters
  • More than 5,300+ scientific videos on LabTube
  • 35 community eNewsletters


Sign In



Forgotten your details? Click Here
If you are not a member you can join here

*Please note: By logging into TechnologyNetworks.com you agree to accept the use of cookies. To find out more about the cookies we use and how to delete them, see our privacy policy.


Scientific News
'Lab on the Skin' for Sweat Analysis
Northwestern University researchers develop a low-cost wearable electronic device that collects and analyzes sweat for health monitoring.
Peer Review is in Crisis, But Should be Fixed, Not Abolished
After the time to get the science done, peer review has become the slowest step in the process of sharing studies, and some scientists have had enough.
Making Every Cell Matter
New method for encapsulating single cells within microgels could boost efficacy of cell-based therapies and tissue engineering.
Modelling Cigarette Effects with Airway-on-a-Chip
An instrument that smokes cigarettes like a human, and delivers whole smoke to the air space of microfluidic human airway chips, enables new insights into how non-smokers and COPD patients respond to smoke.
Robotic Cleaning Technique Could Automate Neuroscience Research
New robotic cleaning technique allows pipettes used in patch-clamping to be re-used up to 11 or more times.
Lab-on-a-Chip to Help Detect Cancer
In this podcast, we speak to Gustavo Stolovitsky to learn about his career and the work he is doing at IBM Research.
First Entirely 3D-printed Organ-on-a-Chip with Integrated Sensors
New approach to manufacturing may allow researchers to rapidly design organs-on-chips that match the properties of a specific disease or individual patient's cells.
3D-Printing in Science: Conference Co-Staged with LABVOLUTION
LABVOLUTION 2017 will have an added highlight of a simultaneous conference, "3D-Printing in Science".
Size Matters for Particles in Bloodstream
Research uncovers more information about how particles behave in the human bloodstream.
Lab-on-a-Chip Detects Effects of Poison
A fast and efficient mixer has been developed for testing the effect of toxic substances faster by using a new lab-on-a-chip.
Scroll Up
Scroll Down
Skyscraper Banner

SELECTBIO Market Reports
Go to LabTube
Go to eposters
 
Access to the latest scientific news
Exclusive articles
Upload and share your posters on ePosters
Latest presentations and webinars
View a library of 1,800+ scientific and medical posters
3,900+ scientific and medical posters
A library of 2,500+ scientific videos on LabTube
5,300+ scientific videos
Close
Premium CrownJOIN TECHNOLOGY NETWORKS PREMIUM FOR FREE!