Cement Analysis by the Fusion Method on Benchtop WDXRF Supermini200
Product News Dec 03, 2012
Rigaku Corporation has announced the publication of a new application report on the chemical analysis of hydraulic cements.
Application Note XRF5046 demonstrates quantitative analysis for Portland and aluminate cements by the fusion method according to ASTM C114-11 on the Rigaku Supermini200, a benchtop sequential wavelength dispersive XRF spectrometer configured for high sensitivity and equipped with a newly developed high-power air-cooled X-ray tube that does not require cooling water.
The report covers sample preparation, method calibration and repeatability.
Cement is one of the most important materials for construction. Different types of hydraulic cement with various physical properties are produced by changing the composition of clinker minerals. It is therefore important to control the chemical composition of cement and interim products.
ASTM C114-11 covers chemical analysis of hydraulic cements. In this standard test method, procedures of wet chemical analysis are described utilizing X-ray fluorescence (XRF) spectrometry as a “rapid test method.”
XRF spectrometry by the fusion method has been the method of choice in cement production processes, due in part to its simple sample preparation and high precision.
The fusion technique involves dissolving a sample in a solvent and producing a homogeneous glass bead. Since the fusion method can eliminate sample heterogeneity such as grain size and mineralogical effects, it is possible to obtain high accuracy for cement samples and also to establish calibrations using a variety of materials.
As detailed in the application note, nine NIST CRMs (Certified Reference Material) of Portland and alumina cement were used for calibration and qualification testing.
The results prove that the analysis method meets the requirements described in ASTM C114-11. The precision obtained by the repeatability test exceeds the requirements defined in the method.