Road Surface Created That Can Melt Ice and Snow on Its Own
Complete the form below to unlock access to ALL audio articles.
Slipping and sliding on snowy or icy roads is dangerous. Salt and sand help melt ice or provide traction, but excessive use is bad for the environment. And sometimes, a surprise storm can blow through before these materials can be applied. Now, researchers reporting in ACS Omega have filled microcapsules with a chloride-free salt mixture that’s added into asphalt before roads are paved, providing long-term snow melting capabilities in a real-world test.
Driving on snowy roads at or near-freezing temperatures can create unsafe conditions, forming nearly invisible, slick black ice, if roads aren’t cleaned quickly enough. But the most common ways to keep roads clear have significant downsides:
- Regular plowing requires costly equipment, is labor intensive and can damage pavement.
- Heavy salt or sand applications can harm the environment.
- Heated pavement technologies are prohibitively expensive to use on long roadways.
Recently, researchers have incorporated salt-storage systems into “anti-icing asphalt” to remove snow and prevent black ice from forming. However, these asphalt pavements use corrosive chloride-based salts and only release snow-melting substances for a few years. So, Yarong Peng, Quansheng Zhao, Xiaomeng Chu and colleagues wanted to develop a longer-term, chloride-free additive to effectively melt and remove snow cover on winter roads.
The researchers prepared a sodium acetate salt and combined it with a surfactant, silicon dioxide, sodium bicarbonate and blast furnace slag — a waste product from power plant operations — to produce a fine powder. They then coated the particles in the powder with a polymer solution, forming tiny microcapsules. Next, the team replaced some of the mineral filler in an asphalt mixture with the microcapsules.
In initial experiments, a pavement block made with the new additive lowered the freezing point of water to -6 F. And the researchers estimated that a 5-cm-thick layer of the anti-icing asphalt would be effective at melting snow for seven to eight years. A real-world pilot test of the anti-icing asphalt on the off-ramp of a highway showed that it melted snow that fell on the road, whereas traditional pavement required additional removal operations. Because the additive used waste products and could release salt for most of a road’s lifetime, the researchers say that is a practical and economic solution for wintertime snow and ice removal.
Reference: Zhao Y, Peng Y, Zhao Q, Chen Y, Chu X. Preparation of a Green Sustained-Release Microcapsule-Type Anti-Icing Agent for Asphalt Pavement and Its Application Demonstration Project. ACS Omega. 2023;8(5):4906-4920. doi:10.1021/acsomega.2c07212
This article has been republished from the following materials. Note: material may have been edited for length and content. For further information, please contact the cited source.